PRO-SET Adhesive dispensing guns
We offer a range of adhesive dispensing guns suitable for use with PRO-SET® epoxy.
300-X Manual Dispensing Gun
The 2-component cartridge is used with the manual PRO-SET cartridge gun enabling the mixed epoxy to be applied quickly, cleanly and accurately. The gun easily dispenses the high viscosity adhesive and its heavy duty construction ensures precise adhesive application and long operating life.
300-B Pneumatic Dispensing Gun
An air-powered dispenser is available for use with PRO-SET Adhesive cartridges in boatyards and large production assembly units where continuous application of the mixed epoxy is required. Power is supplied by a standard air compressor.
Dispensing with 300-MW Mixing Wands
One mixing wand is supplied with each adhesive cartridge. Extra mixing wands are available in packs of 6.
Place the cartridge in the gun and ensure the two pistons are correctly seated against the centres of the seals within the cartridge. Remove the locknut and plugs from the cartridge spouts and position the mixing tube over the spouts and secure with the locknut. The cartridge is then ready to dispense the two epoxy components from the cartridge.
The resin and hardener homogenously mix together in the mixing tube and exude from the unit as a consistent coloured epoxy indicating that the two materials are discharged in the correct ratio and thoroughly blended. Dispense the adhesive as required.